Door Automation: How To Choose Your Electric Gate Motor

Gate Motor

Automating the entrance gates is a great solution for a comfortable living. This is one of the best ways to ensure that there is security to the building. If you are looking to make sure that you have the right advantage, a right electric gate motor will encourage the discoveries of different engines.

Types of electric gate motors

There are different types of motors which are specifically designed to help ensure that you have access to electric gates. These motors are directly connected with gears and can allow one to have reduced speed and allows one of the correct operations of the doors.

Speed reducers worm gear

These are simple motors which is operated by a shaft which is an auger and rotates to contact a toothed crown which can be turned off with other shafts from the crown.

Linear gear

These motors consist of two helical gears which can be placed in a way which can allow one to relate to the other. There is a specific ration which can be transmitted faster by slower motor speed. Each gear allows one to reduce the speed of its previous gear.

Planetary gearbox

These kinds of motors are composed of a central gear and have many gears which revolve around it. This is a system which contains an internal crown which works on the planetary speed systems which revolve around it.

Planetary gearbox

Which motor is suitable for different types of the electric gate?

Sliding doors: Sliding doors operate with worms and wheels, the design is simple and functional where they have a toothed crown which comes in contact with the worm which moves the teeth reducing the transmission speed. There is a displacement of reducers which is straight and can be made into 90 degrees. The worm and the wheel reducer is placed in the upper part of the door which has a system pulley which can help you move in its movements which can get the linear displacement.

Sliding doors

Access grids: Access grids are other types of electric gates which uses the same system for their operations. This reduces the lower part of the coulters and makes the movements through the pin, which is motorised.

Garage door: The garage door is based on a linear reducer where the motion of a low voltage DC motor is set into the linear motor. This type of electric gate which can be lifted, adjusted and titled at the touch of a button. This is one of the greatest advantages which requires less installation space which helps with the reducer open and closes the swing door.

How to find the right engine?

When you are choosing the right motor for the automation of the hinged door, you need to consider the type, length, weight which can be accounted for when indoors or outdoors.

Leave a Reply

Your email address will not be published. Required fields are marked *